Incubator
- Home
- CO2 Incubator Air Jacketed
CO2 Incubators
Large capacity and easy maintenance :
Large 184 L (6.5 cu. ft.) capacity is readily stackable to maximize capacity. Polished stainless steel chamber is designed with coved corners to simplify cleaning.
Proven direct heat technology:
Culture with confidence from the combination of high performance heating elements and advanced insulation surrounding the chamber. Samples benefit from excellent temperature uniformity and recovery performance.
HEPA filter airflow system:
HEPA filter airflow constantly manages air quality within the chamber to help protect cultures against airborne contaminants. It continuously filters the entire chamber volume every 60 seconds and provides ISO Class 5 (Class 100) air quality conditions within 5 minutes of door opening.
On-demand sterilization cycle:
On-demand 140°C high temperature sterilization cycle (approximate cycle length 14 hours), reliably reduces contamination from internal surfaces, simplifying cleaning procedures. The incubator returns to your regular operating conditions at the end of the cycle.
Forma Steri-Cycle CO2 Incubator
Specification:
- Temperature
Control- ±0.1°C
Range-5°C above ambient to 50°C (122F)
Uniformity -±0.3°C @ 37°C (98.6F)
Tracking alarm – User-programmable low - Overtemperature
Sensor-Precision thermistor
Setability-0.1°C - Temperature Safety
Sensor-Independent thermostat
Control-Better than ±0.1%
Inlet pressure-15 PSIG (1.0 bar)
Tracking alarm User-programmable high/low
Humidity (opt. display available)
RH Ambient to 95% @ 37°C (98.6F)
Controller-Independent analog electronic
CO2 (choice of T/C or IR sensor)
Range-0-20%
Readability and setability-0.1%
Humidity pan 3.2 qt. (3.0 liters) standard - Perforated, stainless steel shelves
Dimensions 18.5″x 18.5″ (47.0 cm x 47.0 cm)
Surface area- 2.4 sq. ft. (0.22 sq. m) per shelf,
max. per chamber-38.4 sq. ft. (3.6 sq. m) max.
No. standard-3
No. maximum-16
Shelf load limit-35 lbs. (16 kg) sliding in and out,50 lbs. (23 kg) stationary - Construction
Interior volume-6.5 cu. ft. (184.1 liters)
Interior Type-304, shiny, stainless steel
Exterior-18 gauge, cold-rolled steel
Outer door gasket-Four-sided, molded, magnetic vinyl
Inner door gasket
Feather-edged, silicone - Electrical
Models 370/380-115V, 50/60 Hz, 9.6 FLA (operating range 90-125V) NEMA 5-15P plug
Models 371/381-230V, 50/60 Hz, 4.4 FLA (operating range 180-250V) CEE 7/7 plug
Circuit breaker, power switch-12 Amps, 2 Pole
Convenience receptacle-75 Watts max. (matches cabinet voltage)
Alarm contacts-Deviation of temp, CO2, RH; power failure; customer connections through jack on back of unit
Access port, CO2 inlet -1.3″ (3.3cm) with removable silicone plug, 1/4″ barbed hose
Unit heat load- 341 BTUH (100 Watts), 85 kcal per hour
Air Jacket
Specification:
- Capacity:160 Litre
- Inner Chamber: Stainless Steel with curved corners
- Outer Chamber : MS fine finish powder coated
- Heating Method:Air Jacket
- Temperature Range: RT+5~60°C
- Temperature Control: 0.1°C
- Temperature Stablity : ± 0.3°C
- Programmable tracking alarm indicator for over temp
- Co2 Control Range: 0~20%(IR SENSOR)
- co2 readability-.0.1%
- Co2 Recovery : < or = Calibration x 1.2 min. HEPA filter
- Humidity sensor and digtial display ,Humidifying Method : Natural Evaporization upto 98%
- Humidifying Method : Natural Evaporization upto 98%
- Ambient Temperature : +5~35°C
- Door Heating: to avoid condensation
- Incubator Sterilizer : UV method.
- Perforated SS Shelves Per Chamber: 3(pcs) size: 55x55cm
- Interior Dimension(mm):WxDxH: 570x580x820mm
- Exterior Dimensions(mm):WxDxH:660x680x950mm
- Inpur Power: 570W, 220V,50Hz